Home >> Chemicals Listing >> hot product list by p  

p-Phenylenediamine sulfate (16245-77-5)

Identification
Name:p-Phenylenediamine sulfate
CAS:16245-77-5
EINECS: 240-357-1
Molecular Formula: C6H8N2?H2SO4
Molecular Weight: 206.22
InChI: InChI=1/C6H8N2.H2O4S/c7-5-1-2-6(8)4-3-5;1-5(2,3)4/h1-4H,7-8H2;(H2,1,2,3,4)
Molecular Structure: (C6H8N2?H2SO4) Para-Phenylendiamine Sulfate; ρ-Phenylene diamine sulfate; P-PHENYLENEDIAMINE SULPHATE; benzene-1,4...
Properties
Transport:2811
Flash Point: 135.9°C
Boiling Point: 267.4°Cat760mmHg
Density:g/cm3
Solubility:SOL IN 100 PARTS COLD WATER; SOL IN ALCOHOL, CHLOROFORM, ETHER
SOL IN HOT BENZENE
Water solubility= 38,000 ppm
Appearance:Grey to off-white powder
Specification:

  p-Phenylenediamine sulfate , its cas register number is 16245-77-5. It also can be called 1,4-Benzenediamine sulfate (1:1) ; Benzene-1,4-diammonium sulphate ; and HSDB 6256 . It is hazardous, so the first aid measures and others should be known. Such as: When on the skin: first, should flush skin with plenty of water immediately for at least 15 minutes while removing contaminated clothing. Secondly, get medical aid. Or in the eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Then get medical aid soon. While, it's inhaled: Remove from exposure and move to fresh air immediately. Give artificial respiration while not breathing. When breathing is difficult, give oxygen. And as soon as to get medical aid. Then you have the ingesting of the product: Wash mouth out with water, and get medical aid immediately. Notes to physician: Treat supportively and symptomatically.
In addition, p-Phenylenediamine sulfate (CAS NO.16245-77-5) is not compatible with strong oxidizing agents, acids, acetic anhydride, acid chlorides, chloroformates, and you must not take it with incompatible materials, exposure to moist air or water. And also prevent it to broken down into hazardous decomposition products: Nitrogen oxides, carbon monoxide, carbon dioxide, sulfur oxides (SOx), including sulfur oxide and sulfur dioxide.

Packinggroup: III
Flash Point: 135.9°C
Sensitive: Hygroscopic
Color: WHITE TO SLIGHTLY RED CRYSTALS
WHITE PLATES FROM BENZENE, ETHER
Safety Data
Hazard Symbols T:Toxic