Home >> msds >> Poly(dimethylsiloxane)

Poly(dimethylsiloxane)

Print        Favorite
[Flash Point]

300
[Autoignition]

450
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam.
[Ingestion]

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
[Inhalation]

Remove from exposure to fresh air immediately. Get medical aid if cough or other symptoms appear.
[Skin]

Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
[Eyes]

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
[Storage]

Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container.
[Handling]

Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation.
[Ingestion]

Ingestion of large amounts may cause gastrointestinal irritation.
[Inhalation]

May cause respiratory tract irritation.
[Skin]

May cause skin irritation.
[Eyes]

Causes eye irritation.
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
[Poison Class]

-
[Appearance]

Colorless, viscous liquid.
[Solubility in water]

Insoluble
[Melting Point]

-50
[Density]

0.96 g/cm3
[Usage]

Lubricant.
[Product Name]

Poly(dimethylsiloxane)
[Synonyms]

Dimethylpolysiloxane
Silastic
Silicone oil
[CAS]

"CASEN_63148-62-9.htm">63148-62-9
[EINECS]

213-915-7
[RTECS]

VX6390000
[RTECS Class]

Primary Irritant
[Beilstein/Gmelin]

NA
[Small spills/leaks]

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container.
[Stability]

Stable under normal temperatures and pressures.
[Incompatibilities]

Strong oxidizers.
[Decomposition]

Silicon oxide.