Home >> msds >> Dioctyl sebacate

Dioctyl sebacate

Print        Favorite
[Flash Point]

190
[Autoignition]

99
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. To extinguish fire use water spray, dry chemical, carbon dioxide, or chemical foam.
[Fire Potential]

This chemical is probably combustible.
[Ingestion]

Get medical aid. Wash mouth out with water.
[Inhalation]

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
[Skin]

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
[Eyes]

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
[Storage]

Store in a cool, dry place. Store in a tightly closed container.
[Handling]

Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.
[Ingestion]

The toxicological properties of this substance have not been fully investigated.
[Inhalation]

The toxicological properties of this substance have not been fully investigated.
[Skin]

Non-irritating to the skin.
[Eyes]

Non-irritating to the eyes.
[EC Safety Phrase]

S 24/25
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
[Appearance]

Clear pale yellow liquid with a mild odor.
[Solubility in water]

100 mg/L
[Melting Point]

-55
[Boiling Point]

435
[Vapor Pressure]

9E-8 (25 C)
[Density]

0.914 g/cm3 (20 C)
[Partition Coefficient]

9.86
[Heat Of Vaporization]

69.2 kJ/mol
[Usage]

In vacuum pumps.
[Vapor Density]

14.5
[Refractive Index]

1.458 (20 C)
[Product Name]

Bis(2-ethylhexyl)sebacate
[Synonyms]

Bis(2-ethylhexyl) decanedioate
Bis(2-ethylhexyl)sebacate
Bisoflex
Decanedioic acid, 1,10-bis(2-ethylhexyl) ester
Plexol
[CAS]

"CASEN_122-62-3.htm">122-62-3
[Formula]

C26H50O4
[Molecular Weight]

426.68
[EINECS]

204-558-8
[RTECS]

VS1000000
[RTECS Class]

Other
[Merck]

13,1251
[Beilstein/Gmelin]

1806504
[Beilstein Reference]

4-02-00-02083
[Small spills/leaks]

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container.
[Stability]

Stable.
[Incompatibilities]

Strong oxidizing agents.
[Decomposition]

Carbon monoxide, carbon dioxide.
[HS Code]

2917 13 90