[Flash Point] 60 | |
[Autoignition] 390 | |
[Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Containers may explode when heated. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. | |
[Upper exp. limit] 7.40 | |
[Lower exp. limit] .8 | |
[Fire Potential] Moderately flammable. Combustion with moderate heating. | |
[Ingestion] If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. | |
[Inhalation] Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. | |
[Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | |
[Eyes] Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. | |
[Storage] Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep containers tightly closed. | |
[Handling] Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Use with adequate ventilation. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Use only in a chemical fume hood. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. | |
[Inhalation] Inhalation of high concentrations may cause central nervous system effects characterized by headache, dizziness, unconsciousness and coma. May cause respiratory tract irritation. | |
[Skin] May cause skin irritation. May be absorbed through the skin. | |
[Eyes] Contact may cause transient irritation. | |
[Ingestion] Aspiration hazard. May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May cause central nervous system depression, characterized by excitement, followed by headache, dizziness, drowsiness, and nausea. Advanced stages may cause collapse, unconsciousness, coma and possible death due to respiratory failure. Aspiration of material into the lungs may cause chemical pneumonitis, which may be fatal. | |
[Hazards] Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. | |
[EC Risk Phrase] R 36/37/38 | |
[EC Safety Phrase] S 26 36 | |
[UN (DOT)] 1987 | |
[Personal Protection] Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
[Respirators] A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | |
[Exposure Effects] Prolonged or repeated skin contact may cause defatting and dermatitis. | |
[Poison Class] 4 | |
[Appearance] Clear, colorless, oily liquid with a pungent, sweet odor. | |
[Solubility in water] Soluble | |
[Melting Point] -39 | |
[Boiling Point] 180 | |
[Vapor Pressure] 0.3 (25 C) | |
[Density] 0.818 g/cm3 (20 C) | |
[Partition Coefficient] 2.72 | |
[Heat Of Vaporization] 48.2 kJ/mol | |
[Usage] In manufacture of perfumes, in disinfectant soaps. To prevent foaming. Solvent for fats and waxes. | |
[Saturation Concentration] Approximately 200 ppm (0.02%) at 20 C; 320 ppm (0.032%) at 25 C (calculated) | |
[Vapor Density] 4.5 | |
[Refractive Index] 1.42231 (20 C) | |
[Product Name] DL-2-Octanol | |
[Synonyms] 1-Methyl-1-heptanol 2-Hydroxy-n-octane Capryl alcohol Hexylmethylcarbinol Octan-2-ol | |
[CAS] "CASEN_123-96-6.htm">123-96-6 | |
[Formula] C8H18O | |
[Molecular Weight] 130.22999999999999 | |
[EINECS] 204-667-0 | |
[RTECS] RH0795000 | |
[RTECS Class] Other | |
[Merck] 12,6850 | |
[Beilstein/Gmelin] 1719325 | |
[Beilstein Reference] 4-01-00-01770 | |
[EC Class] irritant | |
[Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation. | |
[Disposal Code] 1 | |
[Incompatibilities] Oxidizing agents | |
[Stability] Stable under normal temperatures and pressures. | |
[Decomposition] Carbon monoxide, carbon dioxide, acrid smoke and fumes. | |
[Combustion Products] Fire may produce irritating, corrosive and/or toxic gases. | |
[UN Number] 1987 | |
[Hazard Class] 3 | |
[Packing Group] I; II; III | |
[HS Code] 2905 16 20 |