Home >> msds >> 4-Bromo-2-fluoroanisole

4-Bromo-2-fluoroanisole

Print        Favorite
[Flash Point]

98
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
[Ingestion]

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
[Inhalation]

Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
[Skin]

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
[Eyes]

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
[Storage]

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
[Handling]

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation.
[Inhalation]

Causes respiratory tract irritation. Can produce delayed pulmonary edema.
[Skin]

Causes skin irritation.
[Eyes]

Causes eye irritation. May cause chemical conjunctivitis.
[Ingestion]

May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
[EC Risk Phrase]

R 36/38
[EC Safety Phrase]

S 26 36
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
[Exposure Effects]

Effects may be delayed.
[Appearance]

Clear very slight yellow liquid.
[Solubility in water]

Insoluble
[Melting Point]

16
[Boiling Point]

215
[Vapor Pressure]

0.22 (25 C)
[Density]

1.59 g/cm3
[Partition Coefficient]

3.16
[Heat Of Vaporization]

43.3 kJ/mol
[Vapor Density]

7.07
[Refractive Index]

1.54 (20 C)
[Product Name]

4-Bromo-2-fluoroanisole
[Synonyms]

4-Bromo-2-fluoro-1-methoxybenzene
Benzene, 4-bromo-2-fluoro-1-methoxy-
[CAS]

"CASEN_2357-52-0.htm">2357-52-0
[Formula]

C7H6BrFO
[Molecular Weight]

205.02
[EINECS]

219-096-2
[Beilstein/Gmelin]

3240714
[Beilstein Reference]

4-06-00-01057
[Small spills/leaks]

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.
[Incompatibilities]

Oxidizing agents.
[Stability]

Stable at room temperature in closed containers under normal storage and handling conditions.
[Decomposition]

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride, hydrogen bromide.