| [Flash Point] 92 | |
| [Autoignition] 265 | |
| [Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. Do NOT get water inside containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam. | |
| [Upper exp. limit] 5.4 | |
| [Lower exp. limit] .9 | |
| [Fire Potential] Combustible; moderate fire risk | |
| [Ingestion] Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid. | |
| [Inhalation] Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. | |
| [Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | |
| [Eyes] Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. | |
| [Storage] Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture. | |
| [Handling] Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not allow contact with water. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep from contact with moist air and steam. | |
| [Inhalation] Causes respiratory tract irritation. Can produce delayed pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation. | |
| [Skin] Causes skin irritation. May cause cyanosis of the extremities. | |
| [Eyes] Causes eye irritation. May cause chemical conjunctivitis and corneal damage. | |
| [Ingestion] May cause gastrointestinal irritation with nausea, vomiting and diarrhea. | |
| [EC Risk Phrase] R 36/37/38 | |
| [EC Safety Phrase] S 26 28 | |
| [Personal Protection] Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
| [Respirators] A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. | |
| [Exposure Effects] Prolonged or repeated skin contact may cause dermatitis. Effects may be delayed. | |
| [Poison Class] 5 | |
| [Appearance] Liquid. | |
| [Solubility in water] Reacts. | |
| [Boiling Point] 190 | |
| [Vapor Pressure] 10 (130 C) | |
| [Density] 1.045 g/cm3 (25 C) | |
| [Usage] Srp: in dental materials, prepn of organosiloxane copolymers, preparation of prosthetics, and contact lenses. | |
| [Vapor Density] 8.6 | |
| [Refractive Index] 1.43 (20 C) | |
| [Product Name] Silane A-174 | |
| [Synonyms] 3-Methacryloxypropyltrimethoxysilane 3-Trimethoxysilylpropyl 2-methylprop-2-enoate Dynasylan MEMO Mops-M Silicone A-174 | |
| [CAS] "CASEN_2530-85-0.htm">2530-85-0 | |
| [Formula] C10H20O5Si | |
| [Molecular Weight] 248.39 | |
| [EINECS] 219-785-8 | |
| [RTECS] UC0230000 | |
| [RTECS Class] Primary Irritant | |
| [Beilstein/Gmelin] 1952435 | |
| [Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. Do not get water inside containers. | |
| [Incompatibilities] Moisture, strong oxidizing agents, strong acids, strong bases. | |
| [Stability] Stable under normal temperatures and pressures. | |
| [Decomposition] Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, silicon oxide. |
Print