Home >> msds >> Divinyltetramethyldisiloxane

Divinyltetramethyldisiloxane

Print        Favorite
[Flash Point]

24
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. To extinguish fire use water spray, dry chemical, carbon dioxide, or chemical foam.
[Ingestion]

Get medical aid. Wash mouth out with water.
[Inhalation]

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
[Skin]

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
[Eyes]

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
[Storage]

Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container. Flammables-area.
[Handling]

Use spark-proof tools and explosion proof equipment. Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.
[Ingestion]

May cause irritation of the digestive tract. May be harmful if swallowed.
[Inhalation]

Causes respiratory tract irritation. May be harmful if inhaled.
[Skin]

Causes skin irritation. May be harmful if absorbed through the skin.
[Eyes]

Causes eye irritation.
[EC Risk Phrase]

R 10 36/37/38
[EC Safety Phrase]

S 16 26 36
[UN (DOT)]

1993
[Personal Protection]

Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
[Appearance]

Colorless liquid.
[Solubility in water]

Insoluble
[Melting Point]

-100
[Boiling Point]

128 - 129
[Density]

0.8153 g/cm3 (20 C)
[Partition Coefficient]

4.15
[Refractive Index]

1.4123 (20 C)
[Product Name]

1,1,3,3-Tetramethyl-1,3-divinyldisiloxane
[Synonyms]

1,1,3,3-Tetramethyl-1,3-divinyldisiloxane
Bis(ethenyldimethylsilyl) ether
Ethenyl-(ethenyl-dimethylsilyl)oxy-dimethylsilane
Tetramethyl-1,3-divinyldisiloxane
[CAS]

"CASEN_2627-95-4.htm">2627-95-4
[Formula]

C8H18OSi2
[Molecular Weight]

186.4
[EINECS]

220-099-6
[RTECS]

JM9235250
[RTECS Class]

Other
[Beilstein/Gmelin]

1762585
[Beilstein Reference]

4-04-00-04080
[Small spills/leaks]

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. Use a spark-proof tool.
[Stability]

Stable under normal shipping and handling conditions.
[Incompatibilities]

Strong oxidizing agents, strong acids, bases.
[Decomposition]

Carbon monoxide, carbon dioxide, silicon oxide.
[UN Number]

1993