[Fire Fighting] Use water in flooding quantities as fog. Solid streams of water may spread fire. Use foam, dry chemical, or carbon dioxide. Keep run-off water out of sewers and water sources. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. | |
[Ingestion] Seek medical attention. If individual is drowsy or unconscious, do not give anything by mouth; place individual on the left side with the head down. Contact a physician, medical facility, or poison control center for advice about whether to induce vomiting. If possible, do not leave individual unattended. | |
[Inhalation] If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention. | |
[Skin] Remove contaminated clothing. Wash exposed area with soap and water. If symptoms persist, seek medical attention. Launder clothing before reuse. | |
[Eyes] If symptoms develop, immediately move individual away from exposure and into fresh air. Flush eyes gently with water for at least 15 minutes while holding eyelids apart; seek immediate medical attention. | |
[Storage] Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage. | |
[Handling] All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. | |
[Ingestion] See inhalation. | |
[Inhalation] Inhalation or contact with vapors, substance, or decomposition products may cause severe injury or death. May produce irritating, toxic and/or corrosive gases. Runoff from fire control may cause pollution. | |
[Skin] See inhalation. | |
[Eyes] See inhalation | |
[Hazards] Self-decomposition or self-ignition may be triggered by heat, chemical reaction, friction or impact. May be ignited by heat, sparks or flames. Some may decompose explosively when heated or involved in a fire. May burn violently. Decomposition may be self-accelerating and produce large amounts of gases. Vapors or dust may form explosive mixtures with air. | |
[UN (DOT)] 3041 | |
[Personal Protection] Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots. | |
[Respirators] Use NIOSH/MSHA approved respirator appropriate for exposure of concern. | |
[Appearance] A white to light colored solid substance. | |
[Product Name] 2-Diazo-1-naphthol-5-sulfonic acid sodium salt | |
[Synonyms] Sodium 1,2-naphthoquinone-2-diazide-5-sulfonate 1-Naphthalenesulfonic acid, 6-diazo-5,6-dihydro-5-oxo-, sodium salt Sodium 2-diazo-1-oxo-1,2-dihydronaphthalene-5-sulfonate Sodium 6-diazo-5,6-dihydro-5-oxonaphthalene-1-sulfonate Sodium 6-diazonio-5-oxidonaphthalene-1-sulfonate | |
[CAS] "CASEN_2657-00-3.htm">2657-00-3 | |
[Formula] C10H5N2O4S.Na | |
[Molecular Weight] 272.22000000000003 | |
[EINECS] 220-189-5 | |
[Beilstein/Gmelin] 6258917 | |
[Small spills/leaks] Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Apply water spray or mist to knock down vapors. Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash, cement powder, or commercial sorbents. Water spill: Use natural barriers or oil spill control booms to limit spill travel. Remove trapped material with suction hoses. | |
[Stability] No data. | |
[Incompatibilities] Toxic gases are formed by mixing materials of this class with acids, aldehydes, amides, carbamates, cyanides, inorganic fluorides, halogenated organics, isocyanates, ketones, metals, nitrides, peroxides, phenols, epoxides, acyl halides, and strong oxidizing or reducing agents Flammable gases are formed by mixing materials in this group with alkali metals Explosive combination can occur with strong oxidizing agents, metal salts, peroxides, and sulfides. | |
[UN Number] 3041 |