Home >> msds >> Bismuth trioxide

Bismuth trioxide

Print        Favorite
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
[Ingestion]

Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
[Inhalation]

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
[Skin]

Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
[Eyes]

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
[Storage]

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
[Handling]

Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
[Inhalation]

May cause respiratory tract irritation.
[Skin]

May cause skin irritation.
[Eyes]

May cause eye irritation.
[Ingestion]

May cause irritation of the digestive tract. May cause liver and kidney damage.
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
[Exposure Effects]

May cause liver and kidney damage.
[Appearance]

Yellow, odorless powder.
[Solubility in water]

Slowly decomposes.
[Melting Point]

825
[Boiling Point]

1890
[Density]

8.9 g/cm3
[Heat Of Vaporization]

[Usage]

Substance is used in disinfectants, magnets, glass, rubber vulcanization.
[Vapor Density]

N/R
[Product Name]

Bismuth(III) oxide
[Synonyms]

Bismuth oxide
Bismuth(III) oxide
[CAS]

"CASEN_1304-76-3.htm">1304-76-3
[Formula]

Bi2O3
[Molecular Weight]

465.95
[EINECS]

215-134-7
[RTECS]

EB2984460
[RTECS Class]

Other
[Merck]

12,1314
[Beilstein/Gmelin]

11111 (G)
[Small spills/leaks]

Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation.
[Incompatibilities]

Oxidizing agents.
[Stability]

Stable under normal temperatures and pressures.
[Decomposition]

Irritating and toxic fumes and gases.