Home >> msds >> Bromotrimethylsilane

Bromotrimethylsilane

Print        Favorite
[Flash Point]

-11
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT get water inside containers. Do NOT use straight streams of water.
[Fire Potential]

Flammable/combustible material. May be ignited by heat, sparks or flames.
[Ingestion]

Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
[Inhalation]

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration.
[Skin]

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
[Eyes]

Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).
[Storage]

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
[Handling]

Wash thoroughly after handling. Use only in a well ventilated area. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
[Ingestion]

Causes digestive tract irritation with possible burns.
[Inhalation]

May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema. Causes chemical burns to the respiratory tract. Vapors may cause dizziness or suffocation.
[Skin]

Causes skin burns.
[Eyes]

Causes eye burns.
[Hazards]

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
[EC Risk Phrase]

R 11 34
[EC Safety Phrase]

S 16 26 36/37/39 45
[UN (DOT)]

2920
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
[Appearance]

Clear yellow liquid.
[Solubility in water]

Insoluble
[Melting Point]

-43
[Boiling Point]

79
[Density]

1.1895 g/cm3 (20 C)
[Partition Coefficient]

2.34
[Heat Of Vaporization]

30.7 kJ/mol
[Vapor Density]

5.3
[Refractive Index]

1.42 (20 C)
[Product Name]

TMBS
[Synonyms]

Trimethylbromosilane
Trimethylsilyl bromide
[CAS]

"CASEN_2857-97-8.htm">2857-97-8
[Formula]

C3H9BrSi
[Molecular Weight]

153.1
[EINECS]

220-672-0
[Beilstein/Gmelin]

1731135
[Beilstein Reference]

4-04-00-04008
[EC Class]

flammable, corrosive
[Small spills/leaks]

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.
[Disposal Code]

24
[Stability]

Stable under normal temperatures and pressures.
[Incompatibilities]

Strong oxidizing agents.
[Decomposition]

Carbon monoxide, carbon dioxide, hydrogen bromide, silicon oxide.
[Combustion Products]

Fire will produce irritating, corrosive and/or toxic gases.
[UN Number]

2920
[Hazard Class]

8
[Packing Group]

I; II
[HS Code]

2931 00 95