[Flash Point] 102 | |
[Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire use water spray, dry chemical, carbon dioxide, or appropriate foam. | |
[Ingestion] Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. | |
[Inhalation] Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. | |
[Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | |
[Eyes] Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. | |
[Storage] Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. | |
[Handling] Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation. Use with adequate ventilation. | |
[Inhalation] Causes respiratory tract irritation. Can produce delayed pulmonary edema. | |
[Skin] Causes skin irritation. | |
[Eyes] Causes eye irritation. May cause chemical conjunctivitis. | |
[Ingestion] May cause gastrointestinal irritation with nausea, vomiting and diarrhea. | |
[Personal Protection] Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
[Respirators] A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. | |
[Exposure Effects] Effects may be delayed. | |
[Appearance] Off-white solid. | |
[Solubility in water] Very soluble | |
[Melting Point] 43 - 44 | |
[Boiling Point] 234 | |
[Vapor Pressure] 0.01 (25 C) | |
[Density] 1.01 g/cm3 (17 C) | |
[pKa/pKb] 3.14 (pKb) | |
[Partition Coefficient] .96 | |
[Heat Of Vaporization] 54.8 kJ/mol | |
[Refractive Index] 1.4487 (25 C) | |
[Product Name] 2-(2-Hydroxyethyl)piperidine | |
[Synonyms] 2-(2-Hydroxyethyl)piperidine 2-Piperidin-2-ylethanol | |
[CAS] "CASEN_1484-84-0.htm">1484-84-0 | |
[Formula] C7H15NO | |
[Molecular Weight] 129.19999999999999 | |
[EINECS] 216-059-2 | |
[Beilstein/Gmelin] 103471 | |
[Beilstein Reference] 4-21-00-00085 | |
[Small spills/leaks] Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation. | |
[Stability] Stable at room temperature in closed containers under normal storage and handling conditions. | |
[Incompatibilities] Strong oxidizing agents, strong acids. | |
[Decomposition] Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen. |