| [Flash Point] 26 | |
| [Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Do NOT use water directly on fire. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water. | |
| [Fire Potential] These substances will accelerate burning when involved in a fire. | |
| [Ingestion] Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. | |
| [Inhalation] Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. | |
| [Skin] Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes. | |
| [Eyes] Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes). | |
| [Storage] Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area. | |
| [Handling] Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. | |
| [Ingestion] Causes gastrointestinal tract burns. May cause severe gastrointestinal tract irritation with nausea, vomiting and possible burns. | |
| [Inhalation] May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. Vapors may cause dizziness or suffocation. | |
| [Skin] May cause severe irritation and possible burns. | |
| [Eyes] Contact with eyes may cause severe irritation, and possible eye burns. | |
| [Hazards] May explode from heat or contamination. May react explosively with hydrocarbons (fuels). May ignite combustibles. | |
| [EC Risk Phrase] R 34 | |
| [EC Safety Phrase] S 26 36/37/39 45 | |
| [UN (DOT)] 1489 | |
| [Personal Protection] Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
| [Respirators] Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | |
| [Appearance] Clear, colorless liquid. | |
| [Solubility in water] Insoluble | |
| [Melting Point] 20 | |
| [Boiling Point] 222 | |
| [Density] 1.2772 g/cm3 (20 C) | |
| [Vapor Density] 8.2 | |
| [Refractive Index] 1.61 (20 C) | |
| [Product Name] Chlorodiphenylphosphine oxide | |
| [Synonyms] (Chloro-phenylphosphoryl)benzene Chlorodiphenylphosphine oxide Diphenylphosphinic acid chloride Diphenylphosphinic chloride Diphenylphosphinyl chloride Diphenylphosphorus oxychloride | |
| [CAS] "CASEN_1499-21-4.htm">1499-21-4 | |
| [Formula] C12H10ClOP | |
| [Molecular Weight] 236.64 | |
| [EINECS] 216-107-2 | |
| [Beilstein/Gmelin] 975191 | |
| [Beilstein Reference] 4-16-00-01038 | |
| [EC Class] flammable, corrosive | |
| [Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors. | |
| [Stability] Stable under normal temperatures and pressures. | |
| [Incompatibilities] Strong oxidizing agents. | |
| [Decomposition] Hydrogen chloride, phosphine, carbon monoxide, oxides of phosphorus, carbon dioxide. | |
| [Combustion Products] Fire may produce irritating, corrosive and/or toxic gases. | |
| [UN Number] 1489 | |
| [Hazard Class] 5.1 | |
| [Packing Group] II | |
| [HS Code] 2931 00 95 |
Print