[Flash Point] 76 | |
[Fire Fighting] For small (incipient) fires, use media such as 'alcohol' foam, dry chemical, or carbon dioxide. For large fires, apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or spray; solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. | |
[Inhalation] If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. | |
[Skin] In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothing and shoes. Call a physician. | |
[Eyes] In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician. | |
[Ingestion] If swallowed, wash out mouth with water provided person is conscious. Call a physician. | |
[Hazards] Emits toxic fumes under fire conditions. | |
[EC Safety Phrase] 23 24/25 | |
[Personal Protection] Compatible chemical-resistant gloves. Chemical safety goggles. Protective clothing. | |
[Appearance] Clear, colorless liquid. | |
[Solubility in water] 3.9 g/L (25 C) | |
[Melting Point] -20 | |
[Boiling Point] 201 | |
[Vapor Pressure] 0.03 (25 C) | |
[Density] 0.962 g/cm3 (20 C) | |
[pKa/pKb] 12.28 (pKa) | |
[Partition Coefficient] 1.94 | |
[Heat Of Vaporization] 44.34 kJ/mol | |
[Refractive Index] 1.425 (20 C) | |
[Product Name] Ethyl 2-isopropylacetoacetate | |
[Synonyms] 2-Acetyl-3-methylbutyric acid ethyl ester 2-Isopropyl-3-oxobutanoic acid ethyl ester Acetoacetic acid, 2-isopropyl-, ethyl ester Butanoic acid, 2-acetyl-3-methyl-, ethyl ester Ethyl 2-isopropylacetoacetate Ethyl a-isopropylacetoacetate | |
[CAS] "CASEN_1522-46-9.htm">1522-46-9 | |
[Formula] C9H16O3 | |
[Molecular Weight] 172.22 | |
[EINECS] 216-192-6 | |
[Beilstein/Gmelin] 636360 | |
[Small spills/leaks] Ventilate area and wash spill site after material pickup is complete. Absorb on sand or vermiculite and place in closed containers for disposal. Wash spill site with soap solution. Flush spill area with copious amounts of water. |