| [Flash Point] -2 | |
| [Fire Fighting] Use water in flooding quantities as fog. Use foam, dry chemical, or carbon dioxide. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Keep run-off water out of sewers and water sources. | |
| [Fire Potential] HIGHLY FLAMMABLE. | |
| [Ingestion] Seek medical assistance. | |
| [Inhalation] Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. | |
| [Skin] Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin. | |
| [Eyes] Immediately flush with running water for at least 20 minutes. | |
| [Storage] Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage. | |
| [Handling] All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. | |
| [Ingestion] See Inhalation. | |
| [Inhalation] TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns, or death. Effects may be delayed. | |
| [Skin] See Inhalation. | |
| [Eyes] See Inhalation. | |
| [Hazards] Vapors form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water. | |
| [EC Risk Phrase] R 11 26 22 36/37/38 42/43 | |
| [EC Safety Phrase] S 16 23 26 36/37/39 45 | |
| [UN (DOT)] 2483 | |
| [Personal Protection] Wear appropriate protective gloves, clothing and goggles. | |
| [Respirators] Wear positive pressure self-contained breathing apparatus (SCBA). | |
| [Appearance] A colorless liquid with a pungent odor. | |
| [Solubility in water] Insoluble | |
| [Boiling Point] 74 | |
| [Density] 0.8669 g/cm3 (20 C) | |
| [Usage] Used to make other chemicals. | |
| [Refractive Index] 1.3825 (20 C) | |
| [Product Name] 2-Isocyanatopropane | |
| [Synonyms] 2-Isocyanatopropane | |
| [CAS] "CASEN_1795-48-8.htm">1795-48-8 | |
| [Formula] C4H7NO | |
| [Molecular Weight] 85.11 | |
| [EINECS] 217-276-5 | |
| [Beilstein/Gmelin] 969356 | |
| [Beilstein Reference] 4-04-00-00530 | |
| [Small spills/leaks] Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard. | |
| [Incompatibilities] Incompatible with many classes of compounds, reacting exothermically to release toxic gases Reactions with amines, aldehydes, alcohols, alkali metals, ketones, mercaptans, strong oxidizers, hydrides, phenols, and peroxides can cause vigorous releases of heat. | |
| [Stability] No data. | |
| [Combustion Products] Fire will produce irritating, corrosive and/or toxic gases. | |
| [UN Number] 2483 | |
| [Hazard Class] 3 | |
| [Packing Group] I |
Print