Home >> msds >> Bleomycin

Bleomycin

Print        Favorite
[Fire Fighting]

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher.
[Ingestion]

If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. MMEDIATELY transport the victim to a hospital.
[Inhalation]

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
[Skin]

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
[Eyes]

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
[Storage]

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
[Handling]

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
[Ingestion]

See inhalation.
[Inhalation]

Symptoms of exposure to this compound may include mucocutaneous reactions such as mouth ulcerations; skin redness, ulceration and blistering; headache, mental confusion, fever, chills, cough, wheezing, pneumonitis, nausea, vomiting, abdominal pain, hypotension, cardiorespiratory collapse, hair loss, and pulmonary fibrosis.
[Skin]

See inhalation.
[Eyes]

See inhalation
[Hazards]

Flash point data for this compound are not available. It is probably nonflammable.
[Personal Protection]

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
[Respirators]

Wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter).
[Appearance]

Colorless or yellowish powder. Possible bluish color depending on copper content.
[Usage]

Inhibits dna metabolism and is used as an antineoplastic, especially for solid tumors.
[Product Name]

3-[[2-[2-[2-[[(2S,3R)-2-[[(2S,3S,4R)-4-[[(2S)-2-[[6-Amino-2-[(1S)-3-amino-1-[[(2S)-2,3-diamino-3-oxopropyl]amino]-3-oxopropyl]-5-methylpyrimidine-4-carbonyl]amino]-3-[(2R,3S,4S,5S,6S)-3-[(2R,3S,4S,5R,6R)-4-carbamoyloxy-3,5-dihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-4,5-dihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-3-(3H-imidazol-4-yl)propanoyl]amino]-3-hydroxy-2-methylpentanoyl]amino]-3-hydroxybutanoyl]amino]ethyl]-1,3-thiazol-4-yl]1,3-thiazole-4-carbonyl]amino]propyl-dimethylsulfanium
[Synonyms]

3-[[2-[2-[2-[[2-[[4-[[2-[[6-Amino-2-[3-amino-1-[(2,3-Diamino-3-oxopropyl)amino]-3-oxopropyl]-5-methylpyrimidine-4-carbonyl]amino]-3-[(2R,3S,4S,5S,6S)-3-[(2R,3S,4S,5R,6R)-4-carbamoyloxy-3,5-dihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-4,5-dihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-3-(3H-imidazol-4-yl)propanoyl]amino]-3-hydroxy-2-methylpentanoyl]amino]-3-hydroxybutanoyl]amino]ethyl]-1,3-thiazol-4-yl]1,3-thiazole-4-carbonyl]amino]propyl-dimethylsulfanium hydrogen sulfate
Bleocin
NSC 125066
[CAS]

11056-06-7
[Formula]

C55H85N17O25S4
[Molecular Weight]

1512.62
[RTECS]

EC5988000
[RTECS Class]

Tumorigen; Drug; Mutagen; Reproductive Effector; Human Data; Primary Irritant
[Beilstein/Gmelin]

8400888
[Small spills/leaks]

If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
[Stability]

No data.