[Flash Point] 170 | |
[Fire Fighting] Wear approved SCBA in full pressure-demand and full protective gear. Water Reactive. Material will react with water and may release a flammable and/or toxic gas. Do NOT use water directly on fire. Use foam, dry chemical, or carbon dioxide. | |
[Ingestion] Do NOT induce vomiting. Allow the victim to rinse his mouth and then to drink 2-4 cupfuls of water, and seek medical advice. | |
[Inhalation] Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. | |
[Skin] Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. | |
[Eyes] Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Get medical aid immediately. | |
[Storage] Store in a cool, dry place. Store in a tightly closed container. Keep away from water. Flammables-area. | |
[Handling] Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation. | |
[Ingestion] The toxicological properties of this substance have not been fully investigated. | |
[Inhalation] May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. | |
[Skin] Causes skin irritation. | |
[Eyes] Causes eye irritation. | |
[EC Risk Phrase] R 11 15 20 34 | |
[EC Safety Phrase] S 16 26 36/37/39 45 | |
[UN (DOT)] 3148 | |
[Appearance] Light yellow viscous liquid | |
[Solubility in water] Reacts | |
[Melting Point] 112 | |
[Boiling Point] 116 - 117 (11 torr) | |
[Density] 1.96 g/cm3 | |
[Heat Of Vaporization] | |
[Usage] Reducing agent. | |
[Product Name] Sodium dihydro-bis-(2-methoxyethoxy)aluminate | |
[Synonyms] Aluminate(1-), dihydrobis(2-methoxyethanolato-O,O')-, sodium Sodium dihydrobis(methoxyethoxy)aluminate Synhydride Vitride | |
[CAS] "CASEN_22722-98-1.htm">22722-98-1 | |
[Formula] C6H16AlNaO4 | |
[Molecular Weight] 202.16 | |
[EINECS] 245-178-2 | |
[Merck] 12,10166 | |
[Beilstein/Gmelin] 160998 (G) | |
[Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, while using/wearing the proper protective equipment. | |
[Incompatibilities] Strong oxidizing agents. | |
[Decomposition] Hydrogen gas. | |
[UN Number] 3148 | |
[Hazard Class] 4.3 | |
[Packing Group] I; II; III |