Home >> msds >> 1-Propyl-4-piperidone

1-Propyl-4-piperidone

Print        Favorite
[Flash Point]

75
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use agent most appropriate to extinguish fire.
[Ingestion]

Do NOT induce vomiting. Allow the victim to rinse his mouth and then to drink 2-4 cupfuls of water, and seek medical advice.
[Inhalation]

Remove from exposure to fresh air immediately.
[Skin]

Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
[Eyes]

If symptoms develop, immediately move individual away from exposure and into fresh air. Flush eyes gently with water for at least 15 minutes while holding eyelids apart; seek immediate medical attention.
[Storage]

Store in a cool, dry place. Keep container closed when not in use. Refrigerator (approx 4C).
[Handling]

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
[Personal Protection]

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
[Respirators]

Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.
[Exposure Effects]

The toxicological properties of this material have not been investigated.
[Appearance]

Clear yellow liquid.
[Boiling Point]

80
[Density]

0.936 g/cm3
[Refractive Index]

1.4631 (20 C)
[Product Name]

1-Propyl-4-piperidone
[Synonyms]

4-Piperidinone, 1-propyl-
[CAS]

"CASEN_23133-37-1.htm">23133-37-1
[Formula]

C8H15NO
[Molecular Weight]

141.21
[EINECS]

245-444-8
[Beilstein/Gmelin]

110297
[Beilstein Reference]

5-21-06-00423
[Small spills/leaks]

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment.
[Stability]

Stable under normal temperatures and pressures.
[Incompatibilities]

Strong oxidizing agents.
[Decomposition]

Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.