| [Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing media: Use foam, dry chemical, or carbon dioxide. | |
| [Ingestion] Get medical aid. Wash mouth out with water. | |
| [Inhalation] Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. | |
| [Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. | |
| [Eyes] Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. | |
| [Storage] Store in a cool, dry place. Store in a tightly closed container. | |
| [Handling] Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Use only in a chemical fume hood. | |
| [Ingestion] May cause irritation of the digestive tract. May be harmful if swallowed. | |
| [Inhalation] Causes respiratory tract irritation. May be harmful if inhaled. May cause burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting. | |
| [Skin] Causes skin irritation. May be harmful if absorbed through the skin. | |
| [Eyes] Causes eye irritation. | |
| [Personal Protection] Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
| [Respirators] Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | |
| [Appearance] Liquid. | |
| [Melting Point] 173 - 175 | |
| [Boiling Point] 379 | |
| [Partition Coefficient] -1.06 | |
| [Product Name] 2-Cyano-3-morpholinoacrylamide | |
| [Synonyms] 2-Cyano-3-morpholin-4-ylprop-2-enamide 2-Propenamide, 2-cyano-3-(4-morpholinyl)- | |
| [CAS] 25229-97-4 | |
| [Formula] C8H11N3O2 | |
| [Molecular Weight] 181.19 | |
| [EINECS] 246-741-5 | |
| [Beilstein/Gmelin] 1212385 | |
| [Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. | |
| [Stability] No data. | |
| [Incompatibilities] Strong oxidizing agents, acids, acid chlorides, carbon dioxide, acid anhydrides. | |
| [Decomposition] Nitrogen oxides, carbon monoxide, carbon dioxide. |
Print