| [Flash Point] 37 | |
| [Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing media: Do NOT use water directly on fire. Use foam, dry chemical, or carbon dioxide. | |
| [Fire Potential] HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. | |
| [Ingestion] Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. | |
| [Inhalation] Remove from exposure to fresh air immediately. | |
| [Skin] Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. | |
| [Eyes] Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. | |
| [Storage] Deep freeze (below -20 C). | |
| [Handling] All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. | |
| [Ingestion] See inhalation. | |
| [Inhalation] May be fatal. May cause irritatior or burns. Vapors may cause dizziness or suffocation. | |
| [Skin] See inhalation. | |
| [Eyes] See inhalation. | |
| [Hazards] Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion and poison hazard indoors, outdoors or in sewers. | |
| [UN (DOT)] 2929 | |
| [Personal Protection] Eyes: Wear safety glasses and chemical goggles if splashing is possible. Skin: Wear appropriate protective gloves and clothing to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin. | |
| [Respirators] Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions. | |
| [Appearance] Pale-yellow. | |
| [Solubility in water] Slightly soluble | |
| [Boiling Point] 57 | |
| [Density] 1.145 g/cm3 | |
| [pKa/pKb] 6.32 (pKa) | |
| [Product Name] 2-Methyl-3-furanthiol | |
| [Synonyms] 2-Methyl-3-furylthiol 2-Methyl-3-mercaptofuran 2-Methylfuran-3-thiol | |
| [CAS] "CASEN_28588-74-1.htm">28588-74-1 | |
| [Formula] C5H6OS | |
| [Molecular Weight] 114.16 | |
| [EINECS] 249-094-7 | |
| [RTECS] LU6235000 | |
| [RTECS Class] Other | |
| [Beilstein/Gmelin] NA | |
| [Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. | |
| [Stability] Stable under normal temperatures and pressures. | |
| [Incompatibilities] Strong oxidizing agents. | |
| [Decomposition] Carbon monoxide, oxides of sulfur, carbon dioxide. | |
| [Combustion Products] Fire will produce irritating, corrosive and/or toxic gases. | |
| [UN Number] 2929 | |
| [Hazard Class] 6.1 | |
| [Packing Group] I; II |
Print