[Flash Point] 92 | |
[Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. To extinguish fire use water spray, dry chemical, carbon dioxide, or chemical foam. | |
[Ingestion] Get medical aid. Wash mouth out with water. | |
[Inhalation] Remove from exposure to fresh air immediately. Get medical aid. | |
[Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. | |
[Eyes] Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. | |
[Storage] Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container. | |
[Handling] Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. | |
[Ingestion] No information found. | |
[Inhalation] Causes respiratory tract irritation. | |
[Skin] Causes skin irritation. | |
[Eyes] Causes eye irritation. | |
[EC Risk Phrase] R 36/38 | |
[EC Safety Phrase] S 26 36 | |
[Personal Protection] Skin: Wear appropriate gloves to prevent skin exposure. Clothing: Wear a chemical apron. | |
[Respirators] Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | |
[Appearance] Colorless liquid. | |
[Solubility in water] Slightly soluble | |
[Melting Point] 4 | |
[Boiling Point] 191 | |
[Vapor Pressure] 0.33 kJ/mol | |
[Density] 1.32 g/cm3 | |
[Partition Coefficient] 1.61 | |
[Heat Of Vaporization] 45.2 kJ/mol | |
[Refractive Index] 1.47 (20 C) | |
[Product Name] 2-(Trifluoromethyl)benzyl alcohol | |
[Synonyms] [2-(Trifluoromethyl)phenyl]methanol Benzenemethanol, 2-(trifluoromethyl)- o-Trifluoromethylbenzyl alcohol | |
[CAS] "CASEN_346-06-5.htm">346-06-5 | |
[Formula] C8H7F3O | |
[Molecular Weight] 176.13 | |
[EINECS] 206-467-9 | |
[Beilstein/Gmelin] 2093714 | |
[Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. | |
[Stability] No data. | |
[Incompatibilities] Oxidizing agents, reducing agents, acid chlorides, acid anhydrides. | |
[Decomposition] Carbon monoxide, carbon dioxide, hydrogen fluoride. |