[Flash Point] >110 | |
[Fire Fighting] Wear approved SCBA in full pressure-demand and full protective gear. In case of fire use water spray, dry chemical, carbon dioxide, or chemical foam. | |
[Ingestion] Get medical aid. Wash mouth out with water. | |
[Inhalation] Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. | |
[Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. | |
[Eyes] Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Get medical aid. Get medical aid immediately. | |
[Storage] Store in a cool, dry place. Store in a tightly closed container. | |
[Handling] Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. | |
[Ingestion] May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. | |
[Inhalation] Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. | |
[Skin] Causes skin irritation. | |
[Eyes] Causes eye irritation. | |
[EC Risk Phrase] R 36/38 | |
[EC Safety Phrase] S 26 36 | |
[Personal Protection] Wear appropriate protective eyeglasses or chemical safety goggles, protective gloves and clothing to prevent exposure. | |
[Respirators] Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | |
[Appearance] Light yellow liquid | |
[Solubility in water] Insoluble | |
[Boiling Point] 231 - 233 | |
[Density] 1.6330 g/cm3 | |
[Refractive Index] 1.6049 (18 C) | |
[Product Name] 1,2-Dimethyl-4-iodobenzene | |
[Synonyms] 1,2-Dimethyl-4-iodobenzene 4-Iodo-o-xylene | |
[CAS] "CASEN_31599-61-8.htm">31599-61-8 | |
[Formula] C8H9I | |
[Molecular Weight] 232.06 | |
[Merck] | |
[Beilstein/Gmelin] 1905729 | |
[Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. | |
[Stability] Stable under normal temperatures and pressures. | |
[Incompatibilities] Strong oxidizing agents, bases. | |
[Decomposition] Carbon monoxide, carbon dioxide, hydrogen iodide. |