[Flash Point] 5 | |
[Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water. | |
[Ingestion] Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. | |
[Inhalation] Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask. | |
[Skin] Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes. | |
[Eyes] Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes). | |
[Storage] Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area. | |
[Handling] Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Use with adequate ventilation. Use only in a chemical fume hood. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. | |
[Ingestion] May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. The toxicological properties of this substance have not been fully investigated. | |
[Inhalation] May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema. Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated. Vapors may cause dizziness or suffocation. | |
[Skin] Causes skin burns. | |
[Eyes] Causes eye burns. Lachrymator. | |
[EC Risk Phrase] R 11 34 36/37 | |
[EC Safety Phrase] S 16 26 36/37/39 45 | |
[UN (DOT)] 2924 | |
[Personal Protection] Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
[Respirators] Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | |
[Appearance] Colorless liquid. Biting odor. | |
[Solubility in water] Insoluble | |
[Boiling Point] 87 | |
[Vapor Pressure] 63 (25 C) | |
[Density] 1.8389 g/cm3 (20 C) | |
[Partition Coefficient] 1.95 | |
[Heat Of Vaporization] 32.8 kJ/mol | |
[Vapor Density] 6.58 | |
[Refractive Index] 1.38 (20 C) | |
[Product Name] 1-Bromo-3,3,3-trifluoroacetone | |
[Synonyms] 3-Bromo-1,1,1-trifluoroacetone 3-Bromo-1,1,1-trifluoropropan-2-one | |
[CAS] "CASEN_431-35-6.htm">431-35-6 | |
[Formula] C3H2BrF3O | |
[Molecular Weight] 190.94 | |
[EINECS] 207-071-9 | |
[Beilstein/Gmelin] 1703387 | |
[Beilstein Reference] 4-01-00-03224 | |
[Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors. | |
[Incompatibilities] Acids (mineral, non-oxidizing, e.g. hydrochloric acid, hydrofluoric acid, muriatic acid, phosphoric acid), acids (mineral, oxidizing, e.g. chromic acid, hypochlorous acid, nitric acid, sulfuric acid), metals (alkali and alkaline, e.g. cesium, potassium, sodium), nitrides (e.g. potassium nitride, sodium nitride), peroxides and hydroperoxides (organic, e.g. acetyl peroxide, benzoyl peroxide, butyl peroxide, methyl ethyl ketone peroxide), explosives (e.g. ammonium nitrate, hydrazoic acid, sodium azide), oxidizing agents (strong, e.g. bromine, hydrogen peroxide, nitrogen dioxide, potassium nitrate), reducing agents (strong, e.g. aluminum carbide, chlorosilane, hydrogen phosphide, lithium hydride), water reactive substances (e.g. acetic anyhdride, alkyl aluminum chloride, calcium carbide, ethyl dichlorosilane). | |
[Stability] No information found. | |
[Decomposition] Carbon monoxide, carbon dioxide, hydrogen fluoride, hydrogen bromide. | |
[UN Number] 2924 |