| [Flash Point] 88 | |
| [Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Containers may explode when heated. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. | |
| [Fire Potential] Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. | |
| [Ingestion] Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. | |
| [Inhalation] Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. | |
| [Skin] Get medical aid. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | |
| [Eyes] Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. | |
| [Storage] Keep away from heat, sparks, and flame. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. | |
| [Handling] Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. | |
| [Inhalation] Aspiration may lead to pulmonary edema. Methemoglobinemia is characterized by dizziness, drowsiness, headache, breath shortness, cyanosis with bluish skin, rapid heart rate and chocolate-brown blood. Inhalation of aniline causes anoxia due to the formation of methemoglobinemia. Inhalation at high concentrations may cause CNS depression and asphixiation. | |
| [Skin] Absorption into the body may cause cyanosis. May cause irritation and dermatitis. May cause cyanosis of the extremities. | |
| [Eyes] May cause chemical conjunctivitis and corneal damage. | |
| [Ingestion] May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Methemoglobinemia is characterized by dizziness, drowsiness, headache, breath shortness, cyanosis with bluish skin, rapid heart rate and chocolate-brown colored blood. Overexposure may cause methemoglobinemia. | |
| [Hazards] Contact with metals may evolve flammable hydrogen gas. | |
| [EC Risk Phrase] R 20/21/22 33 36/38 | |
| [EC Safety Phrase] S 26 36/37/39 | |
| [UN (DOT)] 2811 | |
| [Personal Protection] Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
| [Respirators] A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. | |
| [Exposure Effects] May cause methemoglobinemia, which is characterized by chocolate-brown colored blood, headache, weakness, dizziness, breath shortness, cyanosis, rapid heart rate, unconsciousness and possible death. Effects may be delayed. | |
| [Appearance] Colorless or slight yellow solid. | |
| [Melting Point] 37 | |
| [Boiling Point] 97 (15 torr) | |
| [Density] 1.09 g/cm3 | |
| [Refractive Index] 1.54 (20 C) | |
| [Product Name] 3-Fluoro-p-toluidine | |
| [Synonyms] 3-Fluoro-p-toluidine Benzenamine, 3-fluoro-4-methyl- | |
| [CAS] "CASEN_452-77-7.htm">452-77-7 | |
| [Formula] C7H8FN | |
| [Molecular Weight] 125.14 | |
| [EINECS] 207-212-4 | |
| [RTECS] XU6825000 | |
| [RTECS Class] Other | |
| [Beilstein/Gmelin] 2715987 | |
| [Beilstein Reference] 4-12-00-01981 | |
| [Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Remove all sources of ignition. Use a spark-proof tool. | |
| [Stability] Stable under normal temperatures and pressures. | |
| [Incompatibilities] Strong oxidizing agents, acids, acid chlorides, acid anhydrides, chloroformates. | |
| [Decomposition] Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride. | |
| [Combustion Products] Fire may produce irritating, corrosive and/or toxic gases. | |
| [UN Number] 2811 | |
| [Hazard Class] 6.1 | |
| [Packing Group] I; II; III |
Print