[Flash Point] 222 | |
[Fire Fighting] Extinguish with water spray, carbon dioxide, dry chemical powder or appropriate foam. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. | |
[Ingestion] If swallowed, wash out mouth with water provided person is conscious. Call a physician. | |
[Inhalation] If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. | |
[Skin] In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothing and shoes. Call a physician. | |
[Eyes] In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician. | |
[Storage] Keep containers tightly closed. | |
[Ingestion] May be harmful if swallowed. | |
[Inhalation] Material may be irritating to mucous membranes and upper respiratory tract. May be harmful if inhaled. | |
[Skin] May cause skin irritation. May be harmful if absorbed through the skin. | |
[Eyes] May cause irritation. | |
[Hazards] Emits toxic fumes under fire conditions. | |
[EC Risk Phrase] 50/53 | |
[EC Safety Phrase] 60 61 | |
[UN (DOT)] 3077 | |
[Personal Protection] Compatible chemical-resistant gloves. Chemical safety goggles. Protective clothing. | |
[Respirators] Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a dust mask type N95 (US) or type P1 (EN 143) respirator. | |
[Appearance] Solid. | |
[Solubility in water] 3.1 mg/L (25 C) | |
[Melting Point] 78 - 80 | |
[Boiling Point] 444 | |
[Vapor Pressure] 1.2E-7 (25 C) | |
[Density] 1.52 g/cm3 (20 C) | |
[Partition Coefficient] 4.06 | |
[Heat Of Vaporization] 67.43 kJ/mol | |
[Product Name] Bis(3-nitrophenyl) disulfide | |
[Synonyms] 3,3'-Dinitrodiphenyl disulfide 3-Nitrophenyl disulfide Bis(3-nitrophenyl) disulfide Bis(m-nitrophenyl) disulfide Hinagen Megasul | |
[CAS] "CASEN_537-91-7.htm">537-91-7 | |
[Formula] C12H8N2O4S2 | |
[Molecular Weight] 308.33999999999997 | |
[EINECS] 208-677-6 | |
[Merck] 13,6651 | |
[Small spills/leaks] Sweep up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete. | |
[Stability] Stable at normal temperatures and pressures. | |
[Incompatibilities] Strong oxidizing agents, Strong bases. | |
[Decomposition] arbon monoxide, Carbon dioxide, Nitrogen oxides, Sulfur oxides. | |
[UN Number] 3077 | |
[Hazard Class] 9 | |
[Packing Group] III |