Home >> msds >> Trometamol

Trometamol

Print        Favorite
[Flash Point]

170
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.
[Ingestion]

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
[Inhalation]

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
[Skin]

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
[Eyes]

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
[Storage]

Store in a cool, dry place. Keep away from acids. Keep containers tightly closed.
[Handling]

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation. Discard contaminated shoes.
[Inhalation]

May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema.
[Skin]

May cause skin irritation.
[Eyes]

May cause eye irritation.
[Ingestion]

May cause severe gastrointestinal tract irritation with nausea, vomiting and possible burns.
[EC Risk Phrase]

R 36/37/38
[EC Safety Phrase]

S 26 36
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
[Exposure Effects]

Prolonged or repeated skin contact may cause dermatitis.
[Poison Class]

-
[Appearance]

Crystalline mass or white, crystalline powder, slight characteristic amine odor, hygroscopic.
[Solubility in water]

Very soluble
[Melting Point]

131
[Boiling Point]

357
[Vapor Pressure]

2E-6 (25 C)
[Density]

1.328 g/cm3
[pKa/pKb]

6.22 (pKb)
[Partition Coefficient]

-1.38
[Heat Of Vaporization]

69.7 kJ/mol
[Usage]

In synth of surface-active agents, vulcanization accelerators, pharmaceuticals: titrimetric standard, as emulsifying agent for cosmetic creams & lotions, mineral oil & paraffin wax emulsions, leather dressings, emulsifying agent for textile specialties, polishes, cleaning compd, so-called sol oils.
[Product Name]

2-Amino-2-(hydroxymethyl)-1,3-propanediol
[Synonyms]

2-Amino-2-(hydroxymethyl)-1,3-propanediol
2-Amino-2-(hydroxymethyl)propane-1,3-diol
Aminotris(hydroxymethyl)methane
Tham
Tris(hydroxymethyl)methylamine
Tromethanmin
[CAS]

"CASEN_77-86-1.htm">77-86-1
[Formula]

C4H11NO3
[Molecular Weight]

121.14
[EINECS]

201-064-4
[RTECS]

TY2900000
[RTECS Class]

Drug
[Merck]

12,9902
[Beilstein/Gmelin]

741883
[Beilstein Reference]

4-04-00-01903
[EC Class]

irritant
[Small spills/leaks]

Clean up spills immediately, using the appropriate protective equipment. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal.
[Disposal Code]

28
[Incompatibilities]

Bases, oxidizing agents, acids, aldehydes, copper, brass, and aluminum.
[Stability]

Stable under normal temperatures and pressures.
[Decomposition]

Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
[HS Code]

2922 19 80