| [Flash Point] 104 | |
| [Fire Fighting] Extinguish with water spray, carbon dioxide, dry chemical powder or appropriate foam. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. | |
| [Ingestion] If swallowed, wash out mouth with water provided person is conscious. Call a physician. | |
| [Inhalation] If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. | |
| [Skin] In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothing and shoes. Call a physician. | |
| [Eyes] In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician. | |
| [Storage] Keep tightly closed. Store in a cool dry place. | |
| [Inhalation] Material is irritating to mucous membranes and upper respiratory tract. | |
| [Hazards] Harmful solid or liquid (physical state is temperature dependent). Irritant. Emits toxic fumes under fire conditions. | |
| [EC Risk Phrase] 20/21/22 36/37/38 | |
| [EC Safety Phrase] 26 36 | |
| [Personal Protection] Compatible chemical-resistant gloves. Chemical safety goggles. Protective clothing. | |
| [Respirators] Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. | |
| [Exposure Effects] Causes eye and skin irritation. Harmful if swallowed, inhaled, or absorbed through skin. | |
| [Solubility in water] -/26 g/L (25 C) | |
| [Melting Point] 41.5 | |
| [Boiling Point] 282 | |
| [Vapor Pressure] 0.0058 (25 C) | |
| [Density] 0.803 g/cm3 (25 C) | |
| [Partition Coefficient] 2.98 | |
| [Heat Of Vaporization] 50.03 kJ/mol | |
| [Product Name] 2-Bromo-3-nitrotoluene | |
| [Synonyms] 1-Bromo-2-methyl-6-nitrobenzene 2-Bromo-1-methyl-3-nitrobenzene 2-Bromo-3-methylnitrobenzene | |
| [CAS] "CASEN_41085-43-2.htm">41085-43-2 | |
| [Formula] C7H6BrNO2 | |
| [Molecular Weight] 216.03 | |
| [Beilstein Reference] 4-05-00-00860 | |
| [Small spills/leaks] weep up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete. | |
| [Incompatibilities] Strong oxidizing agents, Strong bases. | |
| [Decomposition] Carbon monoxide, Carbon dioxide, Nitrogen oxides, Hydrogen bromide gas. |
Print