[Flash Point] > 112 | |
[Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. | |
[Ingestion] If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. | |
[Inhalation] Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. | |
[Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | |
[Eyes] Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. | |
[Storage] Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. | |
[Handling] Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation. | |
[Ingestion] Causes digestive tract irritation. | |
[Inhalation] Causes respiratory tract irritation. | |
[Skin] Causes skin irritation. | |
[Eyes] Causes eye irritation. | |
[EC Risk Phrase] R 36/38 | |
[EC Safety Phrase] S 26 36 | |
[Personal Protection] Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
[Respirators] A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. | |
[Appearance] Light yellow liquid. | |
[Boiling Point] 77 | |
[Density] 1.091 g/cm3 (20 C) | |
[Vapor Density] 6.05 | |
[Refractive Index] 1.54 (20 C) | |
[Product Name] 1-(Phenylmethyl)-3-pyrrolidinone | |
[Synonyms] 1-(Phenylmethyl)pyrrolidin-3-one 1-Benzyl-3-pyrrolidinone 3-Pyrrolidinone, 1-(phenylmethyl)- N-Benzyl-3-pyrrolidinone | |
[CAS] "CASEN_775-16-6.htm">775-16-6 | |
[Formula] C11H13NO | |
[Molecular Weight] 175.23 | |
[EINECS] 212-274-0 | |
[Beilstein/Gmelin] 1526217 | |
[Beilstein Reference] 5-21-06-00389 | |
[Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation. | |
[Stability] Stable under normal temperatures and pressures. Air sensitive | |
[Incompatibilities] Strong oxidizing agents, air. | |
[Decomposition] Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen. |