| [Flash Point] 31 | |
| [Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Use agent most appropriate to extinguish fire. Do NOT use straight streams of water. | |
| [Fire Potential] Fire potential:a dangerous fire hazard. | |
| [Ingestion] Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. | |
| [Inhalation] Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. | |
| [Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Remove contaminated clothing and shoes. | |
| [Eyes] Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. | |
| [Storage] Keep away from heat, sparks, and flame. Keep away from sources of ignition. Flammables-area. | |
| [Handling] Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. | |
| [Inhalation] Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause burning sensation in the chest. | |
| [Skin] May cause irritation and dermatitis. May cause cyanosis of the extremities. | |
| [Eyes] May cause chemical conjunctivitis and corneal damage. | |
| [Ingestion] May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Ingestion of large amounts may cause CNS depression. | |
| [Hazards] Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. | |
| [EC Risk Phrase] R 10 21/22 34 | |
| [EC Safety Phrase] S 16 26 36/37/39 45 | |
| [UN (DOT)] 1993 | |
| [Personal Protection] Eyes: Wear chemical goggles. Wear safety glasses and chemical goggles if splashing is possible. Skin: Wear appropriate protective gloves and clothing to prevent skin exposure. Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin. | |
| [Respirators] A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions. | |
| [Exposure Effects] Effects may be delayed. | |
| [Exposure limit(s)] NIOSH REL: TWA 5 ppm (23 mg/m3) [skin] OSHA PEL: TWA 20 ppm (94 mg/m3) [skin] IDLH 100 ppm | |
| [Poison Class] 4 | |
| [Appearance] A colorless liquid with a strong ammonia-like odor. | |
| [Solubility in water] Miscible | |
| [Melting Point] -63 | |
| [Boiling Point] 138 | |
| [Vapor Pressure] 6 | |
| [Density] 0.9166 g/cm3 (15 C) | |
| [pKa/pKb] 6.33 (pKb) | |
| [Partition Coefficient] .18 | |
| [Heat Of Vaporization] 42.33 kJ/mol | |
| [Heat Of Combustion] -3993 kJ/mol | |
| [Usage] Urethane foam catalyst. | |
| [Vapor Density] 4 | |
| [Odor threshold] 25 ppm | |
| [Refractive Index] 1.4388 (20 C) | |
| [Product Name] N-Ethylmorpholine | |
| [Synonyms] 4-Ethylmorpholine | |
| [CAS] "CASEN_100-74-3.htm">100-74-3 | |
| [Formula] C6H13NO | |
| [Molecular Weight] 115.18 | |
| [EINECS] 202-885-0 | |
| [RTECS] QE4025000 | |
| [RTECS Class] Mutagen; Primary Irritant | |
| [Beilstein/Gmelin] 102969 | |
| [Beilstein Reference] 4-27-00-00023 | |
| [EC Class] flammable, harmful | |
| [Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. A vapor suppressing foam may be used to reduce vapors. | |
| [Disposal Code] 5 | |
| [Stability] Stable under normal temperatures and pressures. | |
| [Incompatibilities] Strong oxidizing agents. | |
| [Decomposition] Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen. | |
| [Combustion Products] Irritating vapors and toxic gases, such as ammonia, nitrogen oxides, and carbon monoxide, may be formed when involved in fire. | |
| [UN Number] 1993 | |
| [Hazard Class] 3 | |
| [Packing Group] I; II; III | |
| [HS Code] 2934 99 90 |
Print