Home >> msds >> 1,1,3,3-Tetramethylurea

1,1,3,3-Tetramethylurea

Print        Favorite
[Flash Point]

75
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. Do NOT get water inside containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
[Fire Potential]

Moderate fire hazard, via heat, flame and oxidizers.
[Ingestion]

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
[Inhalation]

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
[Skin]

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
[Eyes]

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
[Storage]

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.
[Handling]

Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not allow contact with water. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep from contact with moist air and steam.
[Ingestion]

May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
[Inhalation]

May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
[Skin]

May cause skin irritation. The toxicological properties of this material have not been fully investigated.
[Eyes]

May cause eye irritation. The toxicological properties of this material have not been fully investigated.
[EC Risk Phrase]

R 63
[EC Safety Phrase]

S 23 36/37
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
[Poison Class]

4
[Appearance]

Colorless liquid with a faint, pleasant odor.
[Solubility in water]

Miscible
[Melting Point]

-1
[Boiling Point]

175
[Vapor Pressure]

14
[Density]

1.165 g/cm3
[pKa/pKb]

12.00 (pKb)
[Partition Coefficient]

.19
[Heat Of Vaporization]

41.79 kJ/mol
[Heat Of Combustion]

-3420 kJ/mol
[Usage]

Solvent & reagent.
[Vapor Density]

4
[Refractive Index]

1.449
[Product Name]

1,1,3,3-Tetramethylurea
[Synonyms]

1,1,3,3-Tetramethylurea
Temur
TMU
[CAS]

"CASEN_632-22-4.htm">632-22-4
[Formula]

C5H12N2O
[Molecular Weight]

116.16
[EINECS]

211-173-9
[RTECS]

YU2625000
[RTECS Class]

Drug; Mutagen; Reproductive Effector
[Merck]

12,9368
[Beilstein/Gmelin]

773898
[Beilstein Reference]

4-04-00-00225
[EC Class]

toxic for reproduction, harmful
[Small spills/leaks]

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. Do not get water inside containers.
[Disposal Code]

9
[Incompatibilities]

Oxidizing agents.
[Stability]

Stable under normal temperatures and pressures.
[Decomposition]

Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.
[HS Code]

2924 19 00