Home >> msds >> N-Methyl-bis(trifluoroacetamide)

N-Methyl-bis(trifluoroacetamide)

Print        Favorite
[Flash Point]

42
[Fire Fighting]

Small Fires: Dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Large Fires: Water spray, fog or alcohol-resistant foam.
[Fire Potential]

Flammable/combustible material. May be ignited by heat, sparks or flames.
[Ingestion]

Seek medical assistance.
[Inhalation]

Move victim to fresh air. Apply artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult.
[Skin]

Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush with running water for at least 20 minutes. Wash skin with soap and water.
[Eyes]

In case of contact with substance, immediately flush with running water for at least 20 minutes.
[Ingestion]

May cause toxic effects.
[Inhalation]

Vapors may cause dizziness or suffocation. May cause toxic effects.
[Skin]

Contact with substance may cause severe burns.
[Eyes]

See Skin.
[Hazards]

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
[EC Risk Phrase]

R 10 34
[EC Safety Phrase]

S 26 36/37/39 45
[UN (DOT)]

2924
[Personal Protection]

Wear appropriate protective gloves, clothing and goggles.
[Respirators]

Wear positive pressure self-contained breathing apparatus (SCBA).
[Boiling Point]

118 - 120
[Density]

1.547 g/cm3 (20 C)
[Refractive Index]

1.35 (20 C)
[Product Name]

2,2,2-Trifluoro-N-methyl-N-(trifluoroacetyl)acetamide
[Synonyms]

2,2,2-Trifluoro-N-methyl-N-(2,2,2-trifluoroacetyl)acetamide
N-Methylbis(trifluoroacetamide)
[CAS]

"CASEN_685-27-8.htm">685-27-8
[Formula]

C5H3F6NO2
[Molecular Weight]

223.07
[EINECS]

211-680-5
[Beilstein/Gmelin]

1878402
[Small spills/leaks]

Make no contact with the spilled material. Fully encapsulating, vapor protective clothing should be worn for spills and leaks with no fire. ELIMINATE all ignition sources and ground all equipment. Stop leak if you can do it without risk. A vapor suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean non-sparking tools to collect absorbed material.
[Combustion Products]

Fire will produce irritating, corrosive and/or toxic gases.
[UN Number]

2924