| [Flash Point] 82 | |
| [Autoignition] 245 | |
| [Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Containers may explode when heated. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. | |
| [Upper exp. limit] 8.2 | |
| [Lower exp. limit] .7 | |
| [Fire Potential] Moderately flammable. Combustion with moderate heating. | |
| [Ingestion] If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately. | |
| [Inhalation] Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. | |
| [Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Remove contaminated clothing and shoes. | |
| [Eyes] Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. | |
| [Storage] Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Refrigerator (approx 4 C). | |
| [Handling] Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. | |
| [Inhalation] Causes respiratory tract irritation. Inhalation may produce burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting. | |
| [Skin] Causes severe skin irritation. May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material. | |
| [Eyes] Causes severe eye irritation. | |
| [Ingestion] May cause gastrointestinal irritation with nausea, vomiting and diarrhea. | |
| [Hazards] Heat can result in a severe polymerization with rapid release of energy. Sealed containers may rupture explosively if hot. | |
| [EC Risk Phrase] R 37/38 43 | |
| [EC Safety Phrase] S 24 37 | |
| [Personal Protection] Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
| [Respirators] Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | |
| [Exposure Effects] Fatigue, headache, and numbness of the tongue were reported following dermal exposure in one worker. Hea (2-hydroxyethyl acrylate) had minimal neurotoxic potential in one animal study. No human data were found at the time of this review with the exception of 1 case of menstrual irregularities from exposure to several acrylates. Animal studies at the time of this review did not show conclusive evidence of fetotoxicity or teratogenicity. | |
| [Poison Class] - | |
| [Appearance] A clear colorless liquid with an acrid odor. | |
| [Solubility in water] Insoluble | |
| [Melting Point] -90 | |
| [Boiling Point] 184 | |
| [Vapor Pressure] 0.14 (20 C) | |
| [Density] 0.8845 g/cm3 (20 C) | |
| [Partition Coefficient] 4.33 | |
| [Heat Of Vaporization] 45.2 kJ/mol | |
| [Heat Of Combustion] -6374 kJ/mol | |
| [Usage] Comonomer with vinyl acetate for polymer emulsion paints, with vinyl chloride for latex paints. | |
| [Vapor Density] 6.35 | |
| [Refractive Index] 1.436 (20 C) | |
| [Product Name] 2-Propenoic acid octyl ester | |
| [Synonyms] IMO Pollution Category 2-Ethylhexyl 2-propenoate 2-Propenoic acid, 2-ethylhexyl ester Acrylic acid, 2-ethylhexyl ester Octyl acrylate | |
| [CAS] "CASEN_103-11-7.htm">103-11-7 | |
| [Formula] C11H20O2 | |
| [Molecular Weight] 184.28 | |
| [EINECS] 203-080-7 | |
| [RTECS] AT0855000 | |
| [RTECS Class] Tumorigen; Primary Irritant | |
| [Beilstein/Gmelin] 1765828 | |
| [Beilstein Reference] 4-02-00-01467 | |
| [EC Index Number] 607-107-00-7 | |
| [EC Class] Irritant; Sensitising | |
| [Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. | |
| [Disposal Code] 1 | |
| [Incompatibilities] Oxidizing agents | |
| [Stability] Stable under normal shipping and handling conditions. However, it may undergo explosive polymerization if uninhibited. May polymerize on exposure to light. May polymerize below 261 Celcius. | |
| [Decomposition] Irritating and toxic fumes and gases, acrid smoke and fumes. | |
| [HS Code] 2916 12 90 |
Print