Home >> msds >> 1-Methyl-3-piperidinemethanol

1-Methyl-3-piperidinemethanol

Print        Favorite
[Flash Point]

94
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
[Ingestion]

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
[Inhalation]

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
[Skin]

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
[Eyes]

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
[Storage]

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
[Handling]

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation.
[Ingestion]

Causes gastrointestinal irritation with nausea, vomiting and diarrhea.
[Inhalation]

Causes respiratory tract irritation.
[Skin]

Causes skin irritation.
[Eyes]

Causes eye irritation.
[EC Risk Phrase]

R 36/38
[EC Safety Phrase]

S 26 36/37/39
[Personal Protection]

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
[Respirators]

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
[Appearance]

Light yellow viscous liquid.
[Solubility in water]

Very soluble
[Boiling Point]

140
[Density]

1.0125 g/cm3 (20 C)
[pKa/pKb]

4.51 (pKb)
[Vapor Density]

4.46
[Refractive Index]

1.4772 (20 C)
[Product Name]

1-Methyl-3-piperidinemethanol
[Synonyms]

(1-Methylpiperidin-3-yl)methanol
3-(Hydroxymethyl)-1-methylpiperidine
3-Hydroxymethyl-N-methylpiperidine
N-Methylpiperidine-3-methanol
[CAS]

"CASEN_7583-53-1.htm">7583-53-1
[Formula]

C7H15NO
[Molecular Weight]

129.19999999999999
[EINECS]

231-488-5
[Beilstein/Gmelin]

103713
[Beilstein Reference]

5-21-01-00108
[Small spills/leaks]

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.
[Stability]

Stable under normal shipping and handling conditions.
[Incompatibilities]

Strong oxidizing agents.
[Decomposition]

Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.