Home >> msds >> 4-Chloro-2-methylthiopyrimidine

4-Chloro-2-methylthiopyrimidine

Print        Favorite
[Flash Point]

101
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing media: Not available.
[Fire Potential]

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
[Ingestion]

Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
[Inhalation]

Remove from exposure to fresh air immediately.
[Skin]

Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
[Eyes]

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids.
[Storage]

Corrosives area.
[Handling]

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
[Ingestion]

Not available.
[Inhalation]

May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract.
[Skin]

May cause severe irritation and possible burns.
[Eyes]

Contact with eyes may cause severe irritation, and possible eye burns.
[Hazards]

Contact with metals may evolve flammable hydrogen gas.
[EC Risk Phrase]

R 36/38
[EC Safety Phrase]

S 26 36
[UN (DOT)]

1760
[Personal Protection]

Eyes: Wear safety glasses and chemical goggles if splashing is possible. Skin: Wear appropriate protective gloves and clothing to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.
[Respirators]

Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.
[Appearance]

Clear dark brown.
[Solubility in water]

Slightly soluble
[Boiling Point]

243
[Vapor Pressure]

0.05 (25 C)
[Density]

1.381 g/cm3
[Partition Coefficient]

1.81
[Heat Of Vaporization]

46.1 kJ/mol
[Refractive Index]

1.60 (20 C)
[Product Name]

4-Chloro-2-methylthiopyrimidine
[Synonyms]

2-(Methylthio)-4-chloropyrimidine
4-Chloro-2-(methylmercapto)pyrimidine
4-Chloro-2-(methylsulfanyl)pyrimidine
[CAS]

"CASEN_49844-90-8.htm">49844-90-8
[Formula]

C5H5ClN2S
[Molecular Weight]

160.62
[EINECS]

256-500-6
[Beilstein/Gmelin]

118042
[Beilstein Reference]

5-23-11-00113
[Small spills/leaks]

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container.
[Stability]

Stable under normal temperatures and pressures.
[Incompatibilities]

Strong oxidizing agents.
[Decomposition]

Hydrogen chloride, nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide, nitrogen.
[Combustion Products]

Fire may produce irritating, corrosive and/or toxic gases.
[UN Number]

1760
[Hazard Class]

8
[Packing Group]

I; II; III