Home >> msds >> 4,4'-Butylidenebis(6-tert-butyl-3-methylphenol)

4,4'-Butylidenebis(6-tert-butyl-3-methylphenol)

Print        Favorite
[Fire Fighting]

Small Fires: Dry chemical, carbon dioxide or water spray. Large Fires: Dry chemical, carbon dioxide, alcohol-resistant foam or water spray.
[Fire Potential]

Combustible material: may burn but does not ignite readily.
[Ingestion]

The possible benefit of early removal of some ingested material by cautious gastric lavage must be weighed against potential complications of bleeding or perforation. Activated charcoal activated charcoal binds most toxic agents and can decrease their systemic absorption if administered soon after ingestion. Activated charcoal: administer charcoal as a slurry (240 ml water/30 g charcoal). Usual dose: 25 to 100 g in adults/adolescents.
[Inhalation]

Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.
[Skin]

Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists. Pesticides - remove contaminated clothing and jewelry. Wash the skin, including hair and nails, vigorously; do repeated soap washings. Discard contaminated clothing. Irritation - treat dermal irritation or burns with standard topical therapy
[Eyes]

Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility.
[Storage]

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
[Handling]

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
[Ingestion]

See Inhalation.
[Inhalation]

TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Effects of contact or inhalation may be delayed.
[Skin]

Contact with molten substance may cause severe burns to skin and eyes. See Inhalation.
[Eyes]

See Inhalation.
[Hazards]

When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
[UN (DOT)]

2430
[Personal Protection]

Wear appropriate protective gloves, clothing and goggles.
[Respirators]

Wear positive pressure self-contained breathing apparatus (SCBA).
[Appearance]

White powder.
[Solubility in water]

Insoluble
[Melting Point]

213.4
[Boiling Point]

483
[Density]

1.03 g/cm3 (25 C)
[pKa/pKb]

11.32 (pKa)
[Partition Coefficient]

8.9
[Usage]

Antioxidant for rubber, dry or latex.
[Product Name]

4,4'-Butylidenebis(6-tert-butyl-3-methylphenol)
[Synonyms]

1,1-Bis(2-methyl-4-hydroxy-5-tert-butylphenyl)butane
1,1-Bis(5-tert-butyl-4-hydroxy-2-methylphenyl)butane
4,4'-Butylidenebis[2-tert-butyl-5-methylphenol]
Annulex PBA 15
Santowhite
SWP
[CAS]

"CASEN_85-60-9.htm">85-60-9
[Formula]

C26H38O2
[Molecular Weight]

382.64
[EINECS]

201-618-5
[RTECS]

GO7050000
[RTECS Class]

Other
[Beilstein/Gmelin]

2016567
[Beilstein Reference]

4-06-00-06807
[Small spills/leaks]

ELIMINATE all ignition sources. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS.
[Stability]

No data.
[Combustion Products]

Fire may produce irritating, corrosive and/or toxic gases.
[UN Number]

2430
[Hazard Class]

8
[Packing Group]

I; II; III