| [Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Non-combustible, substance itself does not burn but may decompose upon heating to produce irritating, corrosive and/or toxic fumes. Runoff from fire control or dilution water may cause pollution. Extinguishing media: Use water spray to cool fire-exposed containers. Do NOT get water inside containers. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray. | |
| [Fire Potential] Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. | |
| [Ingestion] Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. | |
| [Inhalation] Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask. | |
| [Skin] Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes. | |
| [Eyes] Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes). | |
| [Storage] Keep container closed when not in use. Corrosives area. Store protected from moisture. | |
| [Handling] Use only in a well ventilated area. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Do not allow contact with water. Discard contaminated shoes. Keep from contact with moist air and steam. | |
| [Inhalation] Inhalation of high concentrations may cause central nervous system effects characterized by headache, dizziness, unconsciousness and coma. Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause cardiac abnormalities. May cause systemic effects. | |
| [Skin] Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color. | |
| [Eyes] Causes eye burns. May cause chemical conjunctivitis and corneal damage. | |
| [Ingestion] May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause cardiac disturbances. May cause central nervous system effects. May cause systemic effects. | |
| [Hazards] Contact with metals may evolve flammable hydrogen gas. | |
| [EC Risk Phrase] R 34 | |
| [EC Safety Phrase] S 26 36/37/39 45 | |
| [UN (DOT)] 1759 | |
| [Personal Protection] Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves and clothing to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin. | |
| [Respirators] Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | |
| [Exposure Effects] Effects may be delayed. | |
| [Appearance] White to light beige solid. | |
| [Solubility in water] Insoluble | |
| [Melting Point] 93 - 96 | |
| [Product Name] 2,4,6-Triisopropylbenzenesulfonyl chloride | |
| [Synonyms] 2,4,6-Tri(propan-2-yl)benzenesulfonyl chloride 2,4,6-Triisopropylphenylsulfonyl chloride 2,4,6-Tris(1-methylethyl)benzenesulfonyl chloride 2,4,6-Tris(isopropyl)benzenesulfonyl chloride | |
| [CAS] "CASEN_6553-96-4.htm">6553-96-4 | |
| [Formula] C15H23ClO2S | |
| [Molecular Weight] 302.87 | |
| [EINECS] 229-479-6 | |
| [Beilstein/Gmelin] 1218575 | |
| [Beilstein Reference] 3-11-00-00365 | |
| [EC Class] corrosive | |
| [Small spills/leaks] Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation. Do not get water inside containers. | |
| [Disposal Code] 11 | |
| [Incompatibilities] Moisture, oxidizing agents, strong bases. | |
| [Stability] Stable under normal temperatures and pressures. | |
| [Decomposition] Hydrogen chloride, carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide. | |
| [Combustion Products] Fire may produce irritating, corrosive and/or toxic gases. | |
| [UN Number] 1759 | |
| [Hazard Class] 8 | |
| [Packing Group] I; II; III | |
| [HS Code] 2904 90 20 |
Print