| [Flash Point] 22 | |
| [Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water. | |
| [Fire Potential] HIGHLY FLAMMABLE. | |
| [Ingestion] If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid. Wash mouth out with water. | |
| [Inhalation] Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. | |
| [Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | |
| [Eyes] Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. | |
| [Storage] Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a dry area. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area. Refrigerator/flammables. | |
| [Handling] Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. | |
| [Inhalation] May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Vapors may cause dizziness or suffocation. | |
| [Skin] May cause skin irritation. | |
| [Eyes] May cause eye irritation. | |
| [Ingestion] May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. | |
| [Hazards] Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. | |
| [EC Risk Phrase] R 10 | |
| [EC Safety Phrase] S 16 23 24/25 | |
| [UN (DOT)] 2341 | |
| [Personal Protection] Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
| [Respirators] Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary. | |
| [Exposure Effects] The toxological properties of this substance have not been fully investigated. | |
| [Poison Class] 3 | |
| [Appearance] A colorless liquid. | |
| [Solubility in water] 200 mg/L | |
| [Melting Point] -112 | |
| [Boiling Point] 119 | |
| [Vapor Pressure] 27 (15 C) | |
| [Density] 1.2358 g/cm3 (0 C) | |
| [Heat Of Vaporization] 36.58 kJ/mol | |
| [Vapor Density] 5.21 | |
| [Refractive Index] 1.4433 (20 C) | |
| [Product Name] 1-Bromo-3-methylbutane | |
| [Synonyms] 3-Methylbutyl bromide Isoamyl bromide Isopentyl bromide | |
| [CAS] "CASEN_107-82-4.htm">107-82-4 | |
| [Formula] C5H11Br | |
| [Molecular Weight] 151.05000000000001 | |
| [EINECS] 203-522-9 | |
| [RTECS] EJ6230000 | |
| [RTECS Class] Other | |
| [Merck] 13,5130 | |
| [Beilstein/Gmelin] 773652 | |
| [Beilstein Reference] 4-01-00-00328 | |
| [EC Class] flammable | |
| [Small spills/leaks] Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors. | |
| [Disposal Code] 2 | |
| [Stability] Stable under normal temperatures and pressures. | |
| [Incompatibilities] Strong oxidizing agents. | |
| [Decomposition] Carbon monoxide, carbon dioxide, hydrogen bromide. | |
| [Combustion Products] Fire will produce irritating, corrosive and/or toxic gases. | |
| [UN Number] 2341 | |
| [Hazard Class] 3 | |
| [Packing Group] III | |
| [HS Code] 2903 30 36 |
Print