Home >> msds >> Triethylene glycol dimethacrylate

Triethylene glycol dimethacrylate

Print        Favorite
[Fire Fighting]

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use agent most appropriate to extinguish fire.
[Ingestion]

Significant systemic toxicity is not expected after acute ingestion; gastrointestinal decontamination is generally not warranted.
[Inhalation]

If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention.
[Skin]

Remove contaminated clothing and wash exposed area thoroughly with soap and water. A physician should examine the area if irritation or pain persists.
[Eyes]

Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility.
[Storage]

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
[Handling]

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
[Inhalation]

Respiratory depression, pulmonary edema, emphysema, and atelectasis have occurred in animals following large doses.
[Skin]

Allergic contact dermatitis has been reported. Eczematous reactions of onychial and paronychial tissues have been reported in patients using acrylic plastic nails. Dystrophic nail changes may persist for months. Irreversible loss of the fingernails has occurred.
[Ingestion]

Anorexia and nausea has been reported from inhalational exposure. Stomatitis has resulted from contact. Administration to rats by lavage failed to produce gastric lesions.
[Personal Protection]

Suitable protective clothing and self-contained resp protective apparatus should be available for use by those who may have to rescue persons overcome by fumes.
[Respirators]

Use NIOSH/MSHA approved respirator appropriate for exposure of concern.
[Exposure Effects]

Paresthesia have been reported. Headache, irritability, drowsiness and dizziness may occur. There is no evidence of methyl methacrylate-induced teratogenicity in humans but there are conflicting reports in animals.
[Boiling Point]

135 - 139 (1 torr)
[Density]

1.0741 g/cm3 (20 C)
[Partition Coefficient]

1.88
[Usage]

Crosslinking agent for hard contact lenses.
[Refractive Index]

1.4623 (20 C)
[Product Name]

Ethane-1,2-diylbis(oxyethane-2,1-diyl) bis(2-methylacrylate)
[Synonyms]

1,2-bis(2-(methacryloyloxy)ethoxy)ethane
2,2'-Ethylenedioxydiethyl dimethacrylate
Ethylenebis(oxyethylene) methacrylate
NK ester 3G
Tedma
TGM 3
[CAS]

"CASEN_109-16-0.htm">109-16-0
[Formula]

C14H22O6
[Molecular Weight]

286.36
[EINECS]

203-652-6
[RTECS]

OZ4100000
[RTECS Class]

Mutagen
[Beilstein/Gmelin]

1797351
[Beilstein Reference]

4-02-00-01531
[Small spills/leaks]

Evacuate area and ventilate. Wear protective equipment. If required, use an inert absrobent. Sweep up and place in an appropriate container for disposal. Wash contaminated surfaces.
[Stability]

No data.
[Incompatibilities]

Strong oxidizing agents.