[Flash Point] 97 | |
[Fire Fighting] Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire use water spray, dry chemical, carbon dioxide, or appropriate foam. | |
[Ingestion] Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. | |
[Inhalation] Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. | |
[Skin] Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. | |
[Eyes] Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. | |
[Storage] Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. | |
[Handling] Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Wash clothing before reuse. | |
[Inhalation] Causes respiratory tract irritation. Can produce delayed pulmonary edema. | |
[Skin] Causes skin irritation. | |
[Eyes] Causes eye irritation. May cause chemical conjunctivitis. | |
[Ingestion] May cause gastrointestinal irritation with nausea, vomiting and diarrhea. | |
[EC Risk Phrase] R 36/38 | |
[EC Safety Phrase] S 26 36 | |
[Personal Protection] Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. | |
[Respirators] A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. | |
[Exposure Effects] Effects may be delayed. | |
[Appearance] Clear light brown. | |
[Melting Point] 9 | |
[Boiling Point] 197 | |
[Density] 1.26 g/cm3 | |
[Partition Coefficient] 1.78 | |
[Refractive Index] 1.49 (20 C) | |
[Product Name] (3,4-Difluorophenyl)methanol | |
[Synonyms] (3,4-Difluorophenyl)methanol Benzenemethanol, 3,4-difluoro- | |
[CAS] "CASEN_85118-05-4.htm">85118-05-4 | |
[Formula] C7H6F2O | |
[Molecular Weight] 144.12 | |
[EINECS] 285-657-3 | |
[Beilstein/Gmelin] NA | |
[Small spills/leaks] Clean up spills immediately, using the appropriate protective equipment. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Provide ventilation. | |
[Stability] Stable at room temperature in closed containers under normal storage and handling conditions. | |
[Incompatibilities] Strong oxidizing agents. |