| [Fire Fighting] Solid streams of water may be ineffective. Extinguish fire using agent suitable for type of fire. Keep run-off water out of sewers and water sources. | |
| [Ingestion] Seek medical attention. If individual is drowsy or unconscious, do not give anything by mouth; place individual on the left side with the head down. Contact a physician, medical facility, or poison control center for advice about whether to induce vomiting. If possible, do not leave individual unattended. | |
| [Inhalation] If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical attention. | |
| [Skin] Remove contaminated clothing. Wash exposed area with soap and water. If symptoms persist, seek medical attention. Launder clothing before reuse. | |
| [Eyes] If symptoms develop, immediately move individual away from exposure and into fresh air. Flush eyes gently with water for at least 15 minutes while holding eyelids apart; seek immediate medical attention. | |
| [Storage] Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage. | |
| [Handling] All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood. | |
| [Ingestion] See inhalation. | |
| [Inhalation] Inhalation or contact with vapors, substance, or decomposition products may cause severe injury or death. May produce irritating, toxic and/or corrosive gases. Runoff from fire control may cause pollution. | |
| [Skin] See inhalation. | |
| [Eyes] See inhalation | |
| [Hazards] Self-decomposition or self-ignition may be triggered by heat, chemical reaction, friction or impact. Self-accelerating decomposition may occur if the specific control temperature is not maintained. These materials are particularly sensitive to temperature rises. Above a given Control Temperature they decompose violently andcatch fire. May be ignited by heat, sparks or flames. Some may decompose explosively when heated or involved in a fire. May burn violently. Decomposition may be self-accelerating and producelarge amounts of gases. Vapors or dust may form explosive mixtures with air. | |
| [UN (DOT)] 2953 | |
| [Personal Protection] Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots. | |
| [Respirators] Use NIOSH/MSHA approved respirator appropriate for exposure of concern. | |
| [Poison Class] 1 | |
| [Appearance] An odorless white solid. | |
| [Solubility in water] Insoluble | |
| [Melting Point] 78 | |
| [Boiling Point] 351 | |
| [Partition Coefficient] 4.86 | |
| [Usage] Polymerization catalyst. | |
| [Product Name] 2,2'-Azobis(2,4-dimethyl)valeronitrile | |
| [Synonyms] 2-(2-Cyano-4-methylpentan-2-yl)diazenyl-2,4-dimethylpentanenitrile 2,2'-Azobis[2,4-dimethylpentanenitrile] 2,2'-Azodi(2,4-dimethylvaleronitrile) ADVN Vaso 52 | |
| [CAS] "CASEN_4419-11-8.htm">4419-11-8 | |
| [Formula] C14H24N4 | |
| [Molecular Weight] 248.37 | |
| [EINECS] 224-583-8 | |
| [Beilstein/Gmelin] 1728227 | |
| [Beilstein Reference] 4-04-00-03381 | |
| [Small spills/leaks] Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. | |
| [Stability] No data. | |
| [Incompatibilities] Toxic gases are formed by mixing materials of this class with acids, aldehydes, amides, carbamates, cyanides, inorganic fluorides, halogenated organics, isocyanates, ketones, metals, nitrides, peroxides, phenols, epoxides, acyl halides, and strong oxidizing or reducing agents Flammable gases are formed by mixing materials in this group with alkali metals Explosive combination can occur with strong oxidizing agents, metal salts, peroxides, and sulfides. | |
| [UN Number] 2953 |
Print